The issue is caused by the low initial period of the frequency estimation algorithm, which triggers the defects of the hardware, specifically erratum HSW11 and HSW143. The HSW11 requires a period larger than 100 for the INST RETIRED.ALL event, but the initial period in the freq mode is 1. A minimum period of 128 is enforced as well on HSW. HSW143 is regarding that the fixed counter 1 may overcount 32 with the Hyper-Threading is enabled. However, based on the test, the hardware has more issues than it tells. Besides the fixed counter 1, the message 'interrupt took too long' can be observed on any counter which was armed with a period < 32 and two events expired in the same NMI. A minimum period of 32 is enforced for the rest of the events.